Pool filling with gum leaves and twigs? See if Jet-Vac’s 115 mm intake and 3.5-litre debris bag suit your pool, then find a local supplier.
Pools near mature trees can collect more leaves, gum nuts and twigs than a narrow cleaner opening or skimmer basket can comfortably handle. The Jet-Vac automatic pool cleaner is Australian-made in Sydney and designed for pools dealing with regular heavy debris. It collects material in its own onboard bag instead of sending bulky floor debris through the skimmer basket.
Jet-Vac requires a dedicated pressure-cleaner plumbing line. If you are planning a new pool, this provision can be included during construction. Owners of existing pools should ask a pool professional to confirm compatibility before choosing the cleaner.
Can Jet-Vac Handle Heavy Leaf Debris?
Yes. Jet-Vac is designed to collect large leaves, twigs, dirt and other substantial debris from the pool floor. Its 115 mm intake gives bulky material a wide path into the cleaner, while its onboard bag compacts up to 3.5 litres of rubbish. That combination makes it particularly relevant for pools affected by gum leaves, gum nuts and twig debris that may challenge smaller cleaner openings.
Jet-Vac is supplied with the JV32 fine debris bag, which collects both fine and general debris. If a pool regularly receives branches or large twigs, the stronger and coarser JV31 leaf bag may be more suitable. Some owners alternate between the fine and coarse bags as seasonal debris conditions change.
How Jet-Vac Collects Leaves from the Pool Floor
Jet-Vac uses filtered, pressurised water supplied by a booster pump. An upward-facing Venturi jet draws dirt and leaves through the intake and into the debris bag. Its Venturi port remains open in both forward and reverse modes, allowing the cleaner to continue collecting debris throughout its movement cycle.
- Automatic movement: Jet-Vac travels forward for approximately three minutes before reversing and turning for about 45 seconds.
- Obstacle recovery: The reversing cycle helps the cleaner move away from corners and other temporary obstructions.
- Separate debris collection: Leaves and twigs are captured in the onboard bag, keeping bulky floor debris out of the skimmer basket.
- Regular maintenance: The bag must be emptied and rinsed regularly because an overfilled bag can weigh the cleaner down, reduce performance and cause premature damage.
What Does Your Pool Need for Jet-Vac?
Jet-Vac requires a dedicated pressure-cleaner line and a compatible Aqua-Quip booster pump. The booster pump must operate only while the main pool pump is running. Correct installation also includes sizing the feed hose for the pool and setting suitable pressure at the wall fitting.
Jet-Vac normally requires two to three hours of operation per day, although the required cleaning time depends on pool shape, debris load and equipment condition. Aqua-Quip’s optional Flow Control Pro+ synchronises the booster pump with detected water flow and shuts it down if water flow stops or falls significantly.
Is Jet-Vac Right for Your Leafy Pool?
Jet-Vac is a strong option when large leaves and twigs are the problem, but suitability depends on the pool’s plumbing and booster-pump arrangement. Confirming compatibility and selecting the correct debris bag are essential before purchase.
Find an Aqua-Quip pool professional or distributor to check Jet-Vac compatibility and choose the appropriate cleaner setup for your pool.
