EvoCR LED Pool Lights for Existing Concrete Pools
The EvoCR Series LED Light has been developed for renovators of concrete pools.
The Housing is supplied with a 20mm socket for connection to 20mm rigid PVC conduit. The housing has a narrow diameter of just 60mm and is inserted and sealed into a hole that is core-drilled through the pool wall.
Pool light mounts into the existing Aqua-Star housing.
The EvoCR LED Retro Fit Light is supplied with a factory-sealed light and a Quick Connect Plug Kit.
The plug kit connects to the existing cable and is then connected to the rear of the light by tightening the supplied lock nut.
- Operated by extremely safe extra low voltage supply (12V AC)
- Low power consumption, long life-span
- Easy installation and operation.
Operated by extremely safe extra low voltage supply (12V AC), low power consumption, long life-span, easy installation and operation.
Nominal Supply Voltage: | 12V AC 50/60 Hz |
Voltage Tolerance: | +20%, -20% |
Protection Rating: | IPX8 (to 2.0m depth) |
Temperature Range: | 0°C ~ +40°C water temperature |
Power Consumption: | White, blue and green = 8 VA |
Power Consumption: | Spectrum III Multi Colour = 16 VA maximum |
Light Output (typical): | White-550 lumens, blue-180 lumens, green-500 Lumens |
Fault Protection: | Power-cycle “run dry” thermal cut-out. Voltage transient clamping. |
CODE | DESCRIPTION |
---|---|
ASR 001 | Blue EvoCR LED Light, 20m cable |
ASR 002 | White EvoCR LED Light, 20m cable |
ASR 003 | Green EvoCR LED Light, 20m cable |
ASR 004 | Multi-Colour EvoCR LED Light, 20m cable |